Vault HA cluster with integrated storage

19min
|
Vault

Challenge

Vault supports many storage backends to persist its encrypted data (e.g. Consul, MySQL, DynamoDB, etc.).

These backends require:

Their own administration; increasing complexity and total administration.
Configuration to allow Vault as a client.
Vault configuration to connect to the provider as a client.

Solution

Use Vault's Integrated Storage to persist the encrypted data. The integrated storage has the following benefits:

Integrated into Vault (reducing total administration).
All configuration within Vault.
Supports failover and multi-cluster replication.
Eliminates additional network requests.
Lowers complexity when diagnosing issues (leading to faster time to recovery).

Tip

HashiCorp Cloud Platform (HCP) Vault clusters use Integrated Storage. To learn more about the managed Vault clusters, refer to the Getting Started with HCP Vault Dedicated tutorials. If you are a Kubernetes user, visit the Vault Installation to Minikube via Helm with Integrated Storage tutorial.

Prerequisites

This tutorial requires Vault, sudo access, and additional configuration to create the cluster.

Install Vault v1.4.0 or later

Setup

The cluster.sh script configures and starts four Vault servers. Here is a diagram describing the architecture:

vault_1 (http://127.0.0.1:8200) is initialized and unsealed. The root token creates a transit key that enables the other Vaults auto-unseal. This Vault does not join the cluster.
vault_2 (http://127.0.0.2:8200) is initialized and unsealed. This Vault starts as the cluster leader. An example K/V-V2 secret is created.
vault_3 (http://127.0.0.3:8200) is only started. You will join it to the cluster.
vault_4 (http://127.0.0.4:8200) is only started. You will join it to the cluster.

Open a terminal, and create a directory named $HOME/vault-tutorial, and set it as the working directory.
```
$ mkdir $HOME/vault-tutorial && cd $HOME/vault-tutorial
```
Retrieve the configuration by cloning the hashicorp-education/learn-vault-raft repository from GitHub.
```
$ git clone https://github.com/hashicorp-education/learn-vault-raft
```
Change the working directory to learn-vault-raft/raft-storage/local.
```
$ cd learn-vault-raft/raft-storage/local
```
Set the cluster.sh file to executable:
```
$ chmod +x cluster.sh
```
Set up the local loopback addresses for each Vault:
```
$ ./cluster.sh create network[vault_2] Enabling local loopback on 127.0.0.2 (requires sudo)Password:[vault_3] Enabling local loopback on 127.0.0.3 (requires sudo)[vault_4] Enabling local loopback on 127.0.0.4 (requires sudo)
```
Note
This operation requires a user with sudo access. You will be prompted to enter that user's password.
127.0.0.0/8 address block is assigned for use as the Internet host loopback address. (RFC3330)

Create the configuration for each Vault node.

$ ./cluster.sh create config[vault_1] Creating configuration  - creating <path_to_local>/config-vault_1.hcl[vault_2] Creating configuration  - creating <path_to_local>/config-vault_2.hcl  - creating <path_to_local>/raft-vault_2[vault_3] Creating configuration  - creating <path_to_local>/config-vault_3.hcl  - creating <path_to_local>/raft-vault_3[vault_4] Creating configuration  - creating <path_to_local>/config-vault_4.hcl  - creating <path_to_local>/raft-vault_4

Setup vault_1:

Watch out for VAULT_TOKEN

Before proceeding, make sure that you do not already have an existing VAULT_TOKEN environment variable exported in your shell session. If you do find that checking for it with a command like printenv | grep VAULT_TOKEN returns a result, then you must unset it with unset VAULT_TOKEN before proceeding or subsequent steps will likely not succeed.

$ ./cluster.sh setup vault_1[vault_1] starting Vault server @ http://127.0.0.1:8200[vault_1] initializing and capturing the unseal key and root token[vault_1] Unseal key: NheD5HT4IaCjLB2gv7a5t9dfw7tEjoHMZ67DS+5nQ3A=[vault_1] Root token: hvs.YFkvurx85VPSfsEwS6mSnfWj[vault_1] unsealing and logging inKey             Value---             -----Seal Type       shamirInitialized     trueSealed          falseTotal Shares    1Threshold       1Version         1.14.0Build Date      2023-06-19T11:40:23ZStorage Type    inmemCluster Name    vault-cluster-74bee892Cluster ID      d74ca2cf-a081-2918-b8a2-8a2ccd6c5b22HA Enabled      falseSuccess! You are now authenticated. The token information displayed belowis already stored in the token helper. You do NOT need to run "vault login"again. Future Vault requests will automatically use this token.Key                  Value---                  -----token                hvs.YFkvurx85VPSfsEwS6mSnfWjtoken_accessor       Ed0JMHdQGPyoDIrR7WbCGhrntoken_duration       ∞token_renewable      falsetoken_policies       ["root"]identity_policies    []policies             ["root"][vault_1] enabling the transit secrets engine and creating a key to auto-unseal vault clusterSuccess! Enabled the transit secrets engine at: transit/Key                       Value---                       -----allow_plaintext_backup    falseauto_rotate_period        0sdeletion_allowed          falsederived                   falseexportable                falseimported_key              falsekeys                      map[1:1688151586]latest_version            1min_available_version     0min_decryption_version    1min_encryption_version    0name                      unseal_keysupports_decryption       truesupports_derivation       truesupports_encryption       truesupports_signing          falsetype                      aes256-gcm96

vault_1 (http://127.0.0.1:8200) is initialized and unsealed. The transit secrets engine is enabled and a key is created. This will be used to auto-unseal vault_2. The initial root token is stored in the root_token-vault_1 file.

Setup vault_2.

$ ./cluster.sh setup vault_2[vault_2] starting Vault server @ http://127.0.0.2:8200Using [vault_1] root token (hvs.YFkvurx85VPSfsEwS6mSnfWj) to retrieve transit key for auto-unseal[vault_2] initializing and capturing the recovery key and root token[vault_2] Recovery key: VV9QAfeD0DpSIEAyJhuBw9sH5ZSICW/dYeuf/XjVmV4=[vault_2] Root token: hvs.D9IGFnaaq0EQdGEIDMyMincn[vault_2] waiting to finish post-unseal setup (15 seconds)[vault_2] logging in and enabling the KV secrets engineSuccess! You are now authenticated. The token information displayed belowis already stored in the token helper. You do NOT need to run "vault login"again. Future Vault requests will automatically use this token.Key                  Value---                  -----token                hvs.D9IGFnaaq0EQdGEIDMyMincntoken_accessor       WB7pM07o9oydE1DKepOSS2rKtoken_duration       ∞token_renewable      falsetoken_policies       ["root"]identity_policies    []policies             ["root"]Success! Enabled the kv-v2 secrets engine at: kv/[vault_2] storing secret 'kv/apikey' to demonstrate snapshot and recovery methods= Secret Path =kv/data/apikey======= Metadata =======Key                Value---                -----created_time       2023-06-30T19:00:29.354452Zcustom_metadata    <nil>deletion_time      n/adestroyed          falseversion            1= Secret Path =kv/data/apikey======= Metadata =======Key                Value---                -----created_time       2023-06-30T19:00:29.354452Zcustom_metadata    <nil>deletion_time      n/adestroyed          falseversion            1===== Data =====Key       Value---       -----webapp    ABB39KKPTWOR832JGNLS02

vault_2 (http://127.0.0.2:8200) is initialized and unsealed. K/V-V2 secrets engine is enabled with some test data at kv/apikey. The initial root token is stored in the recovery_key-vault_2 file.

Setup vault_3.

$ ./cluster.sh setup vault_3[vault_3] starting Vault server @ http://127.0.0.3:8200Using [vault_1] root token (hvs.S72Tuc0TOI17zoJolxhxZzba) to retrieve transit key for auto-unseal

Create an HA cluster

Currently vault_2 is initialized, unsealed, and has HA enabled. It is the only node in a cluster. The remaining nodes, vault_3 and vault_4, have not joined its cluster.

Examine the leader

Let's discover more about the configuration of vault_2 and how it describes the current state of the cluster.

Open the vault_2 server configuration file (config-vault_2.hcl) in a text editor.

storage "raft" {   path    = "<path_to_local>/raft-vault_2/"   node_id = "vault_2"}listener "tcp" {   address = "127.0.0.2:8200"   cluster_address = "127.0.0.2:8201"   tls_disable = true}seal "transit" {   address            = "http://127.0.0.1:8200"   # token is read from VAULT_TOKEN env   # token              = ""   disable_renewal    = "false"   // Key configuration   key_name           = "unseal_key"   mount_path         = "transit/"}disable_mlock = truecluster_addr = "http://127.0.0.2:8201"

To use the Integrated Storage, the storage stanza is set to raft. The path specifies the path where Vault data will be stored ($HOME/vault-tutorial/learn-vault-raft/raft-storage/local/raft-vault_2/).

Set the VAULT_ADDR to point to vault_2.

$ export VAULT_ADDR="http://127.0.0.2:8200"

Examine the current raft peer set.

$ vault operator raft list-peersNode       Address           State     Voter----       -------           -----     -----vault_2    127.0.0.2:8201    leader    true

The cluster reports that vault_2 is the only node and is currently the leader.

Examine vault_2 root token.

$ cat root_token-vault_2hvs.tgWTO0NoZ1YxR89B4NULANQA

The cluster.sh script captured the root token of vault_2 during its setup and stored it in this file. This root token has privileged access to all nodes within the cluster.

Although the listener stanza disables TLS for this tutorial, Vault should always be used with TLS in production to provide secure communication between clients and the Vault server. It requires a certificate file and key file on each Vault host.

Join nodes to the cluster

Add vault_3 to the cluster using the vault operator raft join command.

Open a new terminal and set the working directory to the learn-vault-raft/raft-storage/local directory.
```
$ cd $HOME/vault-tutorial/learn-vault-raft/raft-storage/local
```

Set the VAULT_ADDR to vault_3 API address.

$ export VAULT_ADDR="http://127.0.0.3:8200"

Join vault_3 to the vault_2 cluster.
```
$ vault operator raft join http://127.0.0.2:8200Key       Value---       -----Joined    true
```
The http://127.0.0.2:8200 is the vault_2 server address which has been already initialized and auto-unsealed. This makes vault_2 the active node and its storage behaves as the leader in this cluster.
Tip
In this scenario, Transit auto-unseal is used; therefore, vault_3 is automatically unsealed once it successfully joins the cluster.
Next, configure the vault CLI to use vault_2 root token for requests.
```
$ export VAULT_TOKEN=$(cat root_token-vault_2)
```

Examine the current raft peer set.

$ vault operator raft list-peersNode       Address           State     Voter----       -------           -----     -----vault_2    127.0.0.2:8201    leader    truevault_3    127.0.0.3:8201    follower  true

Now, vault_3 is listed as a follower node.

Examine vault_3 log file (vault_3.log).

$ cat vault_3.log...[TRACE] storage.raft: setting up raft cluster[TRACE] storage.raft: applying raft config: inputs="map[node_id:vault_3 path:/Users/yoko/vault-tutorial/learn-vault-raft/raft-storage/local/raft-vault_3/]"  ...snip...[INFO]  storage.raft: entering follower state: follower="Node at 127.0.0.3:8201 [Follower]" leader-address= leader-id=[TRACE] storage.raft: finished setting up raft cluster[INFO]  core: successfully joined the raft cluster:leader_addr=http://127.0.0.2:8200

The log describes the cluster joining operations.

Finally, verify that you can read the secret at kv/apikey.

$ vault kv get kv/apikey= Secret Path =kv/data/apikey======= Metadata =======Key                Value---                -----created_time       2022-05-11T23:57:41.394854Zcustom_metadata    <nil>deletion_time      n/adestroyed          falseversion            1===== Data =====Key       Value---       -----webapp    ABB39KKPTWOR832JGNLS02

Retry join

You can use the vault operator raft join command to join vault_4 to the cluster in the same way you joined vault_3 to the cluster. However, if the connection details of all the nodes are known beforehand, you can configure the retry_join stanza in the server configuration file to automatically join the cluster.

Modify the server configuration file, config-vault_4.hcl by adding the retry_join block inside the storage stanza.

  retry_join {      leader_api_addr = "http://127.0.0.2:8200"  }  retry_join {      leader_api_addr = "http://127.0.0.3:8200"  }

The resulting config-vault_4.hcl file should look like:

storage "raft" {   path    = "<path_to_local>/raft-vault_4/"   node_id = "vault_4"   retry_join {      leader_api_addr = "http://127.0.0.2:8200"   }   retry_join {      leader_api_addr = "http://127.0.0.3:8200"   }}listener "tcp" {   address = "127.0.0.4:8200"   cluster_address = "127.0.0.4:8201"   tls_disable = true}seal "transit" {   address            = "http://127.0.0.1:8200"   # token is read from VAULT_TOKEN env   # token              = ""   disable_renewal    = "false"   // Key configuration   key_name           = "unseal_key"   mount_path         = "transit/"}disable_mlock = truecluster_addr = "http://127.0.0.4:8201"

Since the address of vault_2 and vault_3 are known, you can predefine the possible cluster leader addresses in the retry_join block.

Start vault_4.
```
$ ./cluster.sh start vault_4
```
Open a new terminal and set the working directory to the $HOME/vault-tutorial/learn-vault-raft/raft-storage/local directory.
```
$ cd $HOME/vault-tutorial/learn-vault-raft/raft-storage/local
```

Set the VAULT_ADDR to vault_4 API address.

$ export VAULT_ADDR="http://127.0.0.4:8200"

List the peers and notice that vault_4 is listed as a follower node.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.2:8201    leader      truevault_3    127.0.0.3:8201    follower    truevault_4    127.0.0.4:8201    follower    true

Configure the vault CLI, in this terminal, to use vault_2 root token for requests.
```
$ export VAULT_TOKEN=$(cat root_token-vault_2)
```

Patch the secret at kv/apikey.

$ vault kv patch kv/apikey expiration="365 days"= Secret Path =kv/data/apikey======= Metadata =======Key                Value---                -----created_time       2022-05-12T04:07:32.488199Zcustom_metadata    <nil>deletion_time      n/adestroyed          falseversion            2

Return to the terminal you used to configure vault_3 and read the secret again.

$ vault kv get kv/apikey= Secret Path =kv/data/apikey======= Metadata =======Key                Value---                -----created_time       2022-05-12T04:07:32.488199Zcustom_metadata    <nil>deletion_time      n/adestroyed          falseversion            2======= Data =======Key           Value---           -----expiration    365 dayswebapp        ABB39KKPTWOR832JGNLS02

Tip

If you are running Vault in a public cloud, the retry_join stanza supports auto_join parameter which takes cloud provider specific configurations as a string (e.g. provider=aws tag_key=... tag_value=...). Refer to the Vault documentation to learn more.

Data snapshots for recovery

Integrated Storage provides an interface to take snapshots of its data. These snapshots can be used later to restore data if it ever becomes necessary.

Take a snapshot

Return to the terminal where VAULT_ADDR is set to vault_2 address (http://127.0.0.2:8200), and then execute the following command to take a snapshot of the data.

$ vault operator raft snapshot save demo.snapshot

Automated snapshots

Vault Enterprise feature

Automated snapshots require Vault Enterprise 1.6.0 or later.

Instead of taking a snapshot manually, you can schedule snapshots to be taken automatically at your desired interval. You can create multiple automatic snapshot configurations.

Create an automatic snapshot configuration named, daily which takes a snapshot every 24 hours. The snapshots are stored locally in a directory named, raft-backup and retain 5 snapshots before one can be deleted to make room for the next snapshot. The local disk space available to store the snapshot is 1GB. This means that raft-backup retains up to 5 snapshots or 1GB of data whichever the condition meets first.

$ vault write sys/storage/raft/snapshot-auto/config/daily interval="24h" retain=5 \     path_prefix="raft-backup" storage_type="local" local_max_space=1073741824

In absence of a specific file_prefix value, the snapshot files will have a prefix of vault-snapshot.

Read and verify the automatic snapshot configuration.

$ vault read sys/storage/raft/snapshot-auto/config/dailyKey                Value---                -----file_prefix        vault-snapshotinterval           86400local_max_space    1073741824path_prefix        raft-backupretain             5storage_type       local

Available snapshot storage types are: local, aws-s3, azure-blob, and google-gcs. Depending on the target location, the configuration parameters differ.

View the path help on the sys/storage/raft/snapshot-auto/config endpoint.

$ vault path-help sys/storage/raft/snapshot-auto/config/my-configRequest:        storage/raft/snapshot-auto/config/my-configMatching Route: ^storage/raft/snapshot-auto/config/(?P<name>\w(([\w-.]+)?\w)?)$Configure automatic snapshotting## PARAMETERS    aws_access_key_id (string)        AWS access key ID    aws_s3_bucket (string)        AWS bucket    aws_s3_disable_tls (bool)        Disable TLS for the AWS endpoint, intended only for testing    ## ...snip...

First, create an API request payload containing the configuration values.

$ tee payload.json <<EOF{  "interval": "24h",  "local_max_space":  1073741824,  "path_prefix": "raft-backup",  "retain": 5,  "storage_type": "local"}EOF

Create a new daily automatic snapshot configuration.

$ curl --header "X-Vault-Token: <TOKEN>" \   --request POST \   --data @payload.json \   http://<enterprise_addr>:8200/v1/sys/storage/raft/snapshot-auto/config/daily

Read and verify the automatic snapshot configuration.

$ curl -s --header "X-Vault-Token: <TOKEN>" \   http://<enterprise_addr>:8200/v1/sys/storage/raft/snapshot-auto/config/daily \   | jq -r ".data"{  "file_prefix": "vault-snapshot",  "interval": 86400,  "local_max_space": 1073741824,  "path_prefix": "raft-backup",  "retain": 5,  "storage_type": "local"}

In absence of a specific file_prefix value, the snapshot files will have a prefix of vault-snapshot.

Refer to the API documentation for more details.

Simulate loss of data

First, verify that a secrets exists at kv/apikey.

$ vault kv get kv/apikey

Next, delete the secrets at kv/apikey.

$ vault kv metadata delete kv/apikeySuccess! Data deleted (if it existed) at: kv/metadata/apikey

Finally, verify that the data has been deleted.

$ vault kv get kv/apikeyNo value found at kv/data/apikey

Restore data from a snapshot

First, recover the data by restoring the data found in demo.snapshot.

$ vault operator raft snapshot restore demo.snapshot

Optional: You can tail the server log of the active node (vault_2).

$ grep -B3 'snapshot installed' vault_2.log[TRACE] storage.raft.snapshot: snapshot write: writing keys: num_written=39[INFO]  storage.raft: copied to local snapshot: bytes=19213[INFO]  storage.raft.fsm: installing snapshot to FSM[INFO]  storage.raft.fsm: snapshot installed

Verify that the data has been recovered.

$ vault kv get kv/apikey= Secret Path =kv/data/apikey======= Metadata =======Key                Value---                -----created_time       2022-05-12T04:07:32.488199Zcustom_metadata    <nil>deletion_time      n/adestroyed          falseversion            2======= Data =======Key           Value---           -----expiration    365 dayswebapp        ABB39KKPTWOR832JGNLS02

Resign from active duty

Currently, vault_2 is the active node. Experiment to see what happens if vault_2 steps down from its active node duty.

In the terminal where VAULT_ADDR is set to http://127.0.0.2:8200, execute the step-down command.

$ vault operator step-downSuccess! Stepped down: http://127.0.0.2:8200

In the terminal where VAULT_ADDR is set to http://127.0.0.3:8200, examine the raft peer set.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.2:8201    follower    truevault_3    127.0.0.3:8201    leader      truevault_4    127.0.0.4:8201    follower    true

Notice that vault_3 is now promoted to be the leader and vault_2 became a follower.

Remove a cluster member

It may become important to remove nodes from the cluster for maintenance, upgrades, or to preserve compute resources.

Remove vault_4 from the cluster.

$ vault operator raft remove-peer vault_4Peer removed successfully!

Verify that vault_4 has been removed from the cluster by viewing the raft cluster peers.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.2:8201    follower    truevault_3    127.0.0.3:8201    leader      true

Add vault_4 back to the cluster

If you wish to add vault_4 back to the HA cluster, return to the terminal where VAULT_ADDR is set to vault_4 API address (http://127.0.0.4:8200), and stop vault_4.

$ ./cluster.sh stop vault_4

Delete the data directory.

$ rm -r raft-vault_4

Now, create a raft-vault_4 directory again because the raft storage destination must exist before you can start the server.

$ mkdir raft-vault_4

Start the vault_4 server.

$ ./cluster.sh start vault_4

You can again examine the peer set to confirm that vault_4 successfully joined the cluster as a follower.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.2:8201    follower    truevault_3    127.0.0.3:8201    leader      truevault_4    127.0.0.4:8201    follower    true

Recovery mode for troubleshooting

In the case of an outage caused by corrupt entries in the storage backend, an operator might need to start Vault in recovery mode. In this mode, Vault runs with minimal capabilities and exposes a subset of its API.

Start in recovery mode

Use the setup script to stop all remaining cluster members to simulate an outage.

Stop vault_2.

$ ./cluster.sh stop vault_2Found 1 Vault service(s) matching that name[vault_2] stopping

Stop vault_4 if you added it back to the cluster.

$ ./cluster.sh stop vault_4Found 1 Vault service(s) matching that name[vault_4] stopping

Stop vault_3.

$ ./cluster.sh stop vault_3Found 1 Vault service(s) matching that name[vault_3] stopping

Start vault_3 in recovery mode.

$ VAULT_TOKEN=$(cat root_token-vault_1) VAULT_ADDR=http://127.0.0.3:8200 \            vault server -recovery -config=config-vault_3.hcl

Output example:

==> Vault server configuration:               Seal Type: transit         Transit Address: http://127.0.0.1:8200      Transit Key Name: unseal_key      Transit Mount Path: transit/         Cluster Address: http://127.0.0.3:8201            Go Version: go1.20.5               Log Level:         Recovery Mode: true               Storage: raft               Version: Vault v1.14.0, built 2023-06-19T11:40:23Z            Version Sha: 13a649f860186dffe3f3a4459814d87191efc321==> Vault server started! Log data will stream in below:2023-06-30T12:50:34.915-0700 [INFO]  proxy environment: http_proxy="" https_proxy="" no_proxy=""2023-06-30T12:50:34.976-0700 [INFO]  storage.raft.snapshot: reaping snapshot: path=/Users/yoko/vault-tutorial/learn-vault-raft/raft-storage/local/raft-vault_3/raft/snapshots/3-58-1688154202022

Create a recovery operational token

Open a new terminal and set the working directory to the $HOME/vault-tutorial/learn-vault-raft/raft-storage/local directory.
```
$ cd $HOME/vault-tutorial/learn-vault-raft/raft-storage/local
```

Set the VAULT_ADDR to vault_3 API address.

$ export VAULT_ADDR="http://127.0.0.3:8200"

Generate a temporary one-time password (OTP).

$ vault operator generate-root -generate-otp -recovery-tokendpj9OMJ2N4DoFu0bmq1EbPqASGij

Start the generation of the recovery token with the OTP.

Example:

$ vault operator generate-root -init \    -otp=dpj9OMJ2N4DoFu0bmq1EbPqASGij -recovery-token

Output example:

Nonce         f0454dce-b46d-70d1-5ae0-9f7ac9dc1e9fStarted       trueProgress      0/1Complete      falseOTP Length    28

View the recovery key that was generated during the setup of vault_3.
```
$ cat recovery_key-vault_2JRiV5VGrzlB9JVXhfHSunSELfY+pQsqUTxGI8+Hjtpk=
```
Note
Recovery key is used instead of unseal key since this cluster has Transit auto-unseal configured.

Create an encoded token.

$ vault operator generate-root -recovery-tokenOperation nonce: b7411535-8c68-9905-97fc-d7b36dcb1a80Unseal Key (will be hidden):

Enter the recovery key when prompted. The output looks similar to below.

Operation nonce: f0454dce-b46d-70d1-5ae0-9f7ac9dc1e9fUnseal Key (will be hidden):Nonce            f0454dce-b46d-70d1-5ae0-9f7ac9dc1e9fStarted          trueProgress         1/1Complete         trueEncoded Token    DAYYFxcUKVN9XXYNDx9IDSEwXnFSMzt5AzUHCw

Finally, complete the creation of a recovery token with the encoded token and otp.

Example:

$ vault operator generate-root \  -decode=DAYYFxcUKVN9XXYNDx9IDSEwXnFSMzt5AzUHCw \  -otp=dpj9OMJ2N4DoFu0bmq1EbPqASGij \  -recovery-token

Output example:

hvr.XYca3i2bIjxoLAo40cJ8Prna

In recovery mode, Vault launches with a minimal API enabled. In this mode you are able to interact with the raw system backend. Use the recovery operational token to list the contents at sys/raw/sys.
Example:
```
$ VAULT_TOKEN=hvr.XYca3i2bIjxoLAo40cJ8Prna vault list sys/raw/sysKeys----policy/token/
```
Fix the issue using the recovery token.

Resume normal operations

First, stop the Vault server running in recovery mode by pressing Ctrl+C in the terminal where vault_3 is started in recovery mode.

Start Vault service for vault_3.
```
$ ./cluster.sh start vault_3
```
Start vault_2.
```
$ ./cluster.sh start vault_2
```

Cluster reset

When a node is brought up in recovery mode, it resets the list of cluster members. This means that when resuming normal operations, each node will need to rejoin the cluster.

Clean up

When you are done you can quickly stop all services, remove all configuration and remove all modifications to your local system with the same cluster.sh script you used the setup.

Clean up your local workstation.

$ ./cluster.sh clean...Found 4 Vault servicesEach node in the Vault cluster required: - local loopback address - a configuration file - a directory to store the contents of the Raft storage.Removing local loopback address: 127.0.0.2 (sudo required)Removing local loopback address: 127.0.0.3 (sudo required)Removing local loopback address: 127.0.0.4 (sudo required)Removing configuration file <path_to_local>/config-vault_1.hclRemoving configuration file <path_to_local>/config-vault_2.hclRemoving configuration file <path_to_local>/config-vault_3.hclRemoving configuration file <path_to_local>/config-vault_4.hclRemoving raft storage file <path_to_local>/raft-vault_2Removing raft storage file <path_to_local>/raft-vault_3Removing raft storage file <path_to_local>/raft-vault_4Removing key <path_to_local>/unseal_key-vault_1Removing key <path_to_local>/recovery_key-vault_2Removing key <path_to_local>/root_token-vault_1Removing key <path_to_local>/root_token-vault_2Removing log file <path_to_local>/vault_1.logRemoving log file <path_to_local>/vault_2.logRemoving log file <path_to_local>/vault_3.logRemoving log file <path_to_local>/vault_4.logRemoving demo.snapshotClean complete

Help and reference

Vault High Availability

Integrated storage deployment guide

Integrated storage autopilot